The VideoSecu articulating mount is a mounting solution for 25″- 42″, some models up to 55 inch (Please check VESA and Weight). The TV mount fit VESA 200x200mm/200×100/100×100 (8″x8″/8″x4″/4″x4″). This wall mount comes with 4 removable mount adapters. It can extend the VESA to 400×400 400×300 400×200 300×300 300×200 (16″x16″/16″x12″/16″x8″/12″x12″/12″x8″). Please check your TV VESA; these are square or rectangular patterns between 4 and 16 inches per side on the rear of your display. Heavy gauge steel construction provides safety loading up to 88lbs display. The high-tech look mount offers 15 degrees forward and 5 degrees backward tilt, 180 degrees of swivel and extension up to 20 inch for viewing angle and TV placement adjustment. The removable VESA plate may also be taken off for simple installation.
Will the mount fit my TV?
First of all, please check the weight of your display, it must be less than 88 lbs. Secondly, If your Monitor or TV has 4 mounting holes on the back of the screen that are 400×400 400×300 400×200 300×300 300×200 200x200mm/200×100/100×100 (16″x16″/16″x12″/16″x8″/12″x12″/12″x8″/8″x8″/8″x4″/4″x4″) aside from every other vertically and horizontally this bracket will fit. In addition, please check the area inside the 4 mounting holes to verify there don’t seem to be any plugs. Differently, the plate may block the plugs.
Notice: This mount fits most 25-49″ TVs (VESA 400×400/400×300/400×200/300×300/300×200/200×200/200×100/100x100mm(16×16″/16×12″/16×8″/12×12″/12×8″/8×8″/8×4″/4×4″)), some up to 50 55 inch TVs manufactured in contemporary 3 years
Make sure this fits by entering your model number.
Heavy guage steel supports screens up to 88 lbs. compatible with VESA (mounting hole pattern) 400x400mm/400x300mm/400x200mm/300x300mm/300x200mm/200x200mm/200x100mm/100x100mm (16″x16″/16″x12″/16″x8″/12″x12″/12″x8″/8″x8″/8″x4″/4″x4″)
Post-installation level adjustment allows the TV to perfectly level
Tilt+15°/-5°, swivel 180 degrees and rotate for maximum viewing flexibility; VESA plate may also be taken off for simple installation by one person
Low Profile mount retracts to 2.2″ to save space, Extends 20″ from the wall
Standard mounting hardware,10 ft HDMI Cable and 6″ 3-Axis Magnetic Bubble Level included